Engineered for restricted-voltage industrial sites requiring 110V site compliance, this 115mm Angle Grinder 110v combines a high-output motor with ergonomic design to deliver safe, reliable power where high-voltage cords are restricted.
Technical Specifications
|
Feature |
Specification |
|
Rated Voltage |
110V - 120V AC (50Hz / 60Hz - Yellow Site Plug Standard) |
|
Power Input |
850W Heavy-Duty Low-Voltage Motor |
|
No-Load Speed |
11,000 RPM (High-Speed Material Removal) |
|
Disc Diameter |
115mm / 4-1/2" Capacity |
|
Spindle Thread |
M14 or 5/8"-11 Standard Mount |
|
Switch Type |
Rear Slide Switch with Lock-On Function |
|
Power Cord Length |
3.0 Meters Heavy-Duty Rubberized Cord (H0RN-F) |
|
Tool Weight |
1.8 kg (3.97 lbs) |
Key Features
Compact 115mm Disc Capacity: Optimized for precision tight-space cutting, rebar trimming, and surface cleaning where larger 7-inch or 9-inch tools cannot reach.
Quick-Access Spindle Lock: Recessed arbor lock button allows rapid, single-wrench accessory changes directly on scaffolding or staging.
2-Position Auxiliary Side Handle: Secure screw-in handle ports on the left and right housing sides accommodate both left-handed and right-handed operators.
Tool-Adjustable Spark Guard: Heavy-gauge steel protective shroud rotates easily to deflect sparks and debris away from the operator's workspace.
Lightweight Design Architecture
Ultra-Slim Profile Body: Engineered with a reduced grip circumference (only 178mm), allowing operators to maintain a secure, comfortable single-handed grasp during detailed fabrication tasks.
Featherweight 1.8 kg Construction: Streamlined internal component layout and lightweight magnesium gear housing reduce overall tool mass, minimizing wrist fatigue during prolonged overhead or horizontal cutting.
Balanced Center of Gravity: Weight is meticulously distributed between the motor block and rear grip area, ensuring superior control and reducing operator arm strain over long work shifts.
Safety & Electrical Protection Systems
Low-Voltage Electrical Insulation: Reinforced double-insulated housing structure designed to meet rigorous site safety regulations against electrical shock hazards.
No-Volt Release (NVR) Safety Switch: Prevents automatic startup after accidental power interruptions or temporary generator shutdowns on site.
Burst-Resistant Guard Design: Heavy-duty retention guard prevents shrapnel scatter in the rare event of an unexpected abrasive wheel fracture.
Site-Safe 110V Compliance
Job Site Safety Standard: Designed to operate on standard 110V center-tapped earth (CTE) transformers, drastically reducing the risk of severe electrical shock and fully complying with UK and international HSE construction site guidelines.
No-Volt Release (NVR) Switch: Prevents accidental tool startup after a sudden power interruption, accidental unplugging, or generator shutdown. The switch must be manually reset before power can be re-engaged.
Thermal Overload Protection: Built-in electronic sensors monitor motor temperature during heavy, continuous cutting tasks, automatically cutting power before the unit can overheat or burn out.
Packaging & Logistics
Master Carton Structure: Packed in individual heavy-duty 5-ply corrugated export cartons with custom high-density EPE foam inserts to prevent transit impact damage.
Palletization Metrics:
- Units per Master Carton: 6 pcs / Carton
- Carton Gross Weight: 12.8 kg (28.2 lbs)
- Carton Dimensions: 52cm x 34cm x 28cm
- Pallet Capacity: 36 Cartons per standard EURO pallet (216 units total), securely shrink-wrapped and corner-guarded.
Compliance & Shipping: Fully marked with barcode tracking, recycling codes, and international handling symbols for global supply chain distribution.
Our Certificate
Frequently Asked Questions
Q: Why use a 110V angle grinder instead of a standard 230V/240V model?
A: A110V grinders (often paired with a site transformer) are legally mandated on many commercial construction sites, infrastructure projects, and shipyards to protect workers from severe electrical shock hazards.
Q: Can this grinder run directly off standard household wall outlets?
A: No. It is wound specifically for 110V-120V power sources and requires a step-down site transformer if plugged into standard 230V household mains.
Q: What size grinding or cutting discs are compatible with this tool?
A: It is designed exclusively for standard 115mm (4-1/2 inch) wheels featuring a 22.23mm bore and M14 or 5/8"-11 spindle threads.
Q: Does the tool feature a no-volt release safety switch?
A: Yes. The NVR switch ensures the grinder will not restart automatically if power is temporarily cut and restored on the jobsite transformer.
Q: How long is the power cord supplied with the tool?
A: It comes equipped with a flexible, cold-weather resistant 3.0-meter heavy-duty rubberized power cord fitted with an industrial site plug.
Q: Is this grinder suitable for heavy concrete cutting?
A: It handles light-to-moderate masonry scoring and cutting efficiently, though for deep, continuous concrete cutting, a higher-wattage or specialized masonry saw is recommended.
Q: What routine maintenance is required for this corded tool?
A: Periodically check the carbon brushes for wear through the external access caps, blow out dust from cooling vents with compressed air, and inspect the power cord for cuts or fraying.
Q: What warranty coverage is included for commercial purchase?
A: We provide a comprehensive 3-Year Commercial Manufacturer Warranty covering electrical, motor, and mechanical assembly defects.
Hot Tags: 115mm angle grinder 110v, China 115mm angle grinder 110v manufacturers, suppliers, factory, 115 Degree Angle Grinder, 115mm angle grinder, Angle Grinder 115, Handheld Angle Grinders, High Speed Angle Grinder, Mute Angle Grinder
